iD2+

Audient iD2+ is a 10-in / 14-out USB-C desktop audio interface for producers and project studios that use outboard gear and need room to expand. Two Audient Console Mic Preamps provide up to 75 dB of clean gain, and balanced hardware inserts let you patch an external compressor or EQ into either recording channel. The Analogue Tone Suite shapes sounds before conversion, while onboard DSP handles EQ, compression and reverb. Optical ADAT input and output let you add recording and playback channels, and two stereo monitor outputs make it easy to compare mixes on different speakers. The included RM1™ Reference Microphone lets you measure both speaker pairs for built-in RoomTune™ Monitor Correction.

Key features

• 10-in / 14-out USB-C desktop audio interface
• Two Audient Console Mic Preamps with up to 75 dB of clean gain, Smartgain and +48 V phantom power
• Two balanced hardware inserts on channels 1 and 2
• Front-panel JFET instrument input for guitar and bass
• Analogue Tone Suite with HMX, LIFT, GLOW and ORBIT
• 32-bit conversion and sample rates up to 192 kHz
• 128 dB A-weighted line-output dynamic range
• Onboard DSP for EQ, compression and reverb
• Optical ADAT or S/PDIF input and output, plus word clock output
• Two stereo monitor outputs for main and alternate speaker pairs
• 6.3 mm and 3.5 mm headphone sockets, with two Artist Mixes available in iD Control
• RoomTune™ Monitor Correction with the RM1™ Reference Microphone included
• Audio loopback for streaming, podcasting and computer audio capture
• USB-C bus power or optional external USB-C power

Overview

Included Content

• 1 × Audient iD2+ desktop audio interface
• 1 × 1 m USB-C to USB-C cable
• 1 × Audient RM1™ Reference Microphone with microphone clip
• Access to the Audient ARC software bundle after product registration

Creative Tools

• Patch an external compressor or EQ into either balanced insert to shape the signal before conversion. Compress a vocal on the way in while keeping the second channel available for an acoustic instrument, or process both channels when recording a stereo source.
• Use Smartgain to set input levels while a performer plays or sings the loudest part of the take. Connect a guitar or bass to the JFET input to capture a direct signal and try different amp simulations later.
• Shape the mic signal with the Analogue Tone Suite. Add harmonic saturation with HMX, lift the high frequencies with LIFT, combine both with GLOW or use ORBIT to hear how a change in input impedance affects the microphone’s response.
• Apply onboard EQ or compression to the mic/line inputs at sample rates up to 96 kHz. Add reverb to the headphone mix so the performer can hear some space while tracking.
• Connect a compatible ADAT preamp to record a drum kit or ensemble, or use the optical output to send extra playback channels to an external converter. The word clock output lets you synchronise compatible digital equipment.
• Measure your main and alternate monitor pairs with RoomTune™ and the included RM1™ microphone. Switch between speakers to check how vocal level, low-end balance and stereo effects translate, with correction applied on the interface.
• Create an Artist Mix in iD Control so the performer can hear a different balance from yours. Bring up the live input or backing track in the cue mix without changing the main monitor mix.
• Use audio loopback to capture a remote guest, backing track or computer playback alongside live inputs. Recall input gain, tone and routing in iD Control when you return to a session.

Ideal For

• Project studios that use outboard compressors or EQs
• Musicians recording vocals, guitars or stereo instruments
• Producers who want to expand both inputs and outputs via ADAT
• Mix engineers who compare playback on two speaker pairs
• Studios that want built-in monitor correction with a measurement microphone included
• Podcasters and livestreamers who need computer audio loopback