8010A Studio Monitor RAW

Genelec 8010A Studio Monitor RAW is a compact two-way active nearfield monitor with an unpainted die-cast aluminium enclosure that leaves the metal’s natural surface visible. Designed for desktop production, audio editing and mobile recording, it pairs a 76 mm (3-inch) woofer with a 19 mm (¾-inch) metal-dome tweeter, each powered by its own 25 W Class D amplifier. The cabinet is just 121 mm wide, making it easy to place beside a display or on a small workstation. A balanced XLR input connects to compatible studio equipment, while rear-panel Bass Tilt and Desktop switches help adapt the response to the monitor’s placement. The RAW version is supplied as a single monitor with an Iso-Pod™ stand.

Key features

• Compact two-way active nearfield studio monitor
• RAW finish with exposed, unpainted die-cast aluminium
• 76 mm (3-inch) woofer and 19 mm (¾-inch) metal-dome tweeter
• Dedicated 25 W Class D amplifier for each driver
• 67 Hz–25 kHz frequency response at −6 dB
• 96 dB short-term maximum SPL at 1 m under Genelec’s test conditions
• Directivity Control Waveguide (DCW™) for controlled sound dispersion
• Balanced analogue XLR input with switchable −10 dB sensitivity
• Bass Tilt and Desktop switches for placement compensation
• Iso-Pod™ stand for tilt adjustment and isolation from the work surface
• Intelligent Signal Sensing (ISS™) automatic standby

Overview

Included Content

• 1 × Genelec 8010A Studio Monitor, RAW
• 1 × 1.8 m mains cable
• 1 × Iso-Pod™ kit
• Operating manual

Creative Tools

• Build a compact stereo setup with two 8010A monitors. Place them symmetrically around a display to check panning, vocal placement and stereo effects at close listening distances.
• Aim the monitor towards your ears with the included Iso-Pod™ stand. The adjustable tilt is useful when the cabinet sits below ear height, and the stand helps limit vibration transfer to the desk.
• Engage the Desktop switch if a reflective work surface adds emphasis around 200 Hz. The 4 dB cut gives you a way to address that placement effect before adjusting the low mids in your mix.
• Use Bass Tilt to reduce bass output when a wall or corner makes the low end sound too prominent. Compare the stepped settings with familiar reference tracks before settling on a position.
• Connect a compatible audio interface, mixer or monitor controller through the balanced XLR input. The −10 dB sensitivity setting can give you more usable travel on your source’s volume control when monitoring at close range.
• Check dialogue edits, vocal balance and instrument placement on a desktop system. Add a compatible subwoofer if your work regularly requires judging deep bass below the 8010A’s operating range.
• Bring a familiar listening reference to a location recording or temporary editing station. At 1.5 kg per cabinet, the 8010A is easy to move, and its rear-panel switches let you adjust for a different placement.

Ideal For

• Home and project studios with limited desk space
• Music producers working at close listening distances
• Podcast, dialogue and video editors
• Mobile and location recording engineers
• Broadcast workstations
• Compact stereo setups using two 8010A monitors
• Studios looking for a monitor with an exposed aluminium finish